Alphacom a300 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Teléfono Alphacom a300. Alphacom a300 20 páginas. Range headsetphone

10.

Connecting to Telephone Socket

When the setting up instructions have been completed, connect the plug at the end of

the telephone lead into the telephone socket. The plug will only fit the correct way round.

11.

1. Lift up the Handset or press the Handsfree button

2 Press Set button, the month setting flashes in the display

3. press * KEY repeatedly to select the correct month

4. Press # KEY to confirm the setting.The Day setting will then flash in the display

5. press * KEY repeateldy to select the correct Day

6. Press # KEY to confirm the setting.The Hour setting will then flash in the display

7. press * KEY repeatedly to select the correct Hour

8. Press # KEY to confirm the setting.The Minutes setting will then flash in the display

9. press * KEY repeatedly to select the correct Minutes

10. Press SET key again to confirm the setting

11. Replace the Handset in the cradle or press Handsfree button to disconnect the line.

After approximately 6 second the Date/Time will be displayed

12.

RINGER OFF/LO/HI switch.

Set the switch to the LO or Hl position as desired to give a quiet or loud ring. The Ringer

may also be switched OFF by setting the switch to the OFF position. Outgoing calls may

still be made with the switch set to the OFF position.

RINGER pITCH switch.

Set the switch to the Hl, MED or LO position to adjust the pitch of the ringer.

13.

You may wish to mount the a300 Headsetphone on a wall.

To do this:

Slide the plastic, "wall mount" upwards to remove, turn it around and replace it in the

slot.

The Handset will then stay in the cradle when the telephone is on the wall.

position screw into the wall ensuring that the screw head is 5mm from the wall.

place the telephone on the screw using the keyhole slot on the rear of the telephone.