Axminster 502695 Instrucciones de montaje - Página 2

Navegue en línea o descargue pdf Instrucciones de montaje para Accesorios Axminster 502695. Axminster 502695 2 páginas.

Turning the Blanks (see Diagram A)

• Mount 7mm spacer bushing on the mandrel, followed by the tip bushing; wide end first.

Insert the blank. Follow with the cap bushing; narrow end first. Mount spacer bushing to

fill the space to the threads on the mandrel. Screw on the knurled nut hand tight. Bring

the tailstock in snug to the mandrel and tighten the knurled nut for turning.

Do not over-tighten the knurled nut, it may damage the mandrel.

• Turn the blank down close to the bushings. Follow with abrasives until the barrel

diameters are flush with the bushings.

• Finish with your choice of polish.

Diagram B

Assembly

(Line up finished parts according to Diagram B)

1. Slide the spring onto the refill and place inside the tip assembly. Screw

the pen mechanism into the tip assembly.

2. Press Clip/Cap assembly into the upper end of the barrel.

3. Push pen tube with Clip/Cap assembly onto completed lower assembly.

4. The pen is now ready to operate; twist clockwise to open.

axminstertools.com

Axminster Tools, Axminster, Devon, EX13 5PH