Axminster RBG200 Engineer Series Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Amoladora Axminster RBG200 Engineer Series. Axminster RBG200 Engineer Series 7 páginas. Bench grinders

Imprimir página

screw

long bolt

base

big washer

spring washer

10.

nut

11.

Fitting and adjusting

In order to achieve better effect, we only

recommend the accessories of our machine.

when

using

replacing parts, you should observe

the following instructions

Generally speaking:

Only use the parts or accessories in

proper size

Turn off the switch and cut off the

electric power before replace the

parts or begin other operation.

Fitting the bench grinder(picture E)

·Put the bench grinder on the flat table.

·Fix the bench grinder to the table or

proper table frame with bolts.

To achieve the requirements, you can

fix with 4 proper long bolts. When using

short bolts, you must take the rubber mat

away from the fitting hole.

Fitting parts( picture A,B,C,F)

Before using, you need to fix eye

shield brackets, fit and adjust the

adjustable tool rest, and fit the eye

shield bracket to keep the maximum

distance between parts.( picture A,B,C)

·the distance between the bracket and

bench

grinder

wheels is 2mm

·the distance between the tool rest and

wheels is 2mm

If the bench grinder you bought has two

different adjustable tool rests, the

wider one should be fitted on the side of

the wider grinding wheel.

· Adjust the eye shield brackets to ensure

they can supply the maximum protection.

·The grinding wheels should be changed

if they are damaged 20% during polishing.

·When using the bench grinder for the

first time, you should let it work 5

minutes under non-load condition.

Grinding wheel

When the distance between grinding

wheel and eye shield brackets reaches 5mm,

grinding wheel should be changed.

"sound test" should be taken when

using new grinding wheel. Knocking the

grinding wheel lightly can produce

ringing sound.

If you hear depressing sound,

the grinding wheels can't be

used.

Replace the grinding wheel(picture D)

· Take off the bolt(6) with turret spanner

and remove the outer guard(5).

·Loosen nut (4) with 18mm spanner, and

remove outer flange(3)and grinding

wheel(2) in turn.

·Make sure that inner flange(1) is on

the axes.

·Take off the old grinding wheel, and fit

the new grinding wheel on the axes(make

sure that the new grinding wheel is