AccuMed ABP802 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro AccuMed ABP802. AccuMed ABP802 16 páginas. Upper arm blood pressure monitor

* lf you are not going to use the unit for a long period of time (approximately three months

or more), remove the batteries.

* Replace worn batteries with their polarities in the correct direction.

TIME AND VOICE ON/OFF OF SYSTEM SETUP

1. Press "SET" key to turn on.

2. Press and hold "SET" key until the year number displays and flashes

on LCD to enter the settings mode.

Press the "MEM" key to adjust the year, then press "SET" key again to

save your setting and enter the month setting mode.

4. Press "MEM" key to adjust the month. Following the same steps to

adjust date/hour/minute/(Voice on/off) until setting completed ("

On, "

" is the Off) Non-talking model does not have this function, or you may choose

method No.2 to set the voice.

Method No.2 for voice setting: Please press and hold the "MEM" button when the device is

in the shutdown state to enter the voice setting. Please press the "MEM" button again to

choose "ON" or "OF". Press the "ON/OFF" button to quit.

The monitor has two kinds of blood pressure display units mm Hg(mmHg), kPa (kPa). (mmHg

is the factory default). While the monitor is off, press and

hold the ON/OFF button for 5 seconds. The monitor will

boot up and measure showing the other unit. (If it was in

mmHG it will change to kPa and vice versa.) Also the

stored values will be shown in the new unit.

" is the