Alphalite Alpha FPL-14H Instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación para Equipos de iluminación Alphalite Alpha FPL-14H. Alphalite Alpha FPL-14H 4 páginas. Led flat panel

Imprimir página
Installation Instructions
LED Flat Pant Light
Recessed Installation Steps:
1. Bend out mounting tab 90 degrees on each corner
2. Use side cutters to adjust each tab to height of T-grid. Lay fixture into T-grid grid.
3. Ben tabs flush against T-grid in order to clear corner for ceiling tile.
4. Ensure that the wiring of the last fixture in the row is properly terminated. Then make all
electrical connections to the fixture. Attach the wiring access cover plate.
CAUTION
1. Avoid direct eye exposure to the light source while it is on.
2. Account for small parts and destroy packing material, as these may be hazardous to children
3. Disconnect power and allow fixture to cool before changing bulb or handing fixture.
Surface Mount Installation Steps (Required additional kit from manufacturer):
1. Put the four peices of frame together and fix them by screws.
2. Fix the frame onto the wall by screws.
10715 Springdale Ave, Unit 4, Santa Fe Springs, CA 90670
Tel: 1-888-287-9228
l
l
Fax: 1-888-258-9183
l
2