AlphaShield FIREWALL Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Tarjeta de red AlphaShield FIREWALL. AlphaShield FIREWALL 19 páginas. Alphashield hardware firewall user's manual
También para AlphaShield FIREWALL: Manual del usuario (6 páginas)

Imprimir página

• Unblocks specific IP Addresses with port ranges

• Opens specific IP Addresses and port ranges to allow access through them only

• Opens specific ports or range of ports for hosting and playing games or using IM

for voice communication

• Opens ports from a specific IP Address for VPN, Remote Access, etc.

• Blocks all 65,536 ports for both TCP-IP and UDP communications

• Stops most third party pop-ups

• True plug n' play installation and operation

• No technical knowledge needed for setup and installation; less than 1 minute

setup

• No future software patches or upgrades required

• Functions with all operating system platforms

• Compatible with Cable, xDSL, or ISDN

• Firmware immune to viruses and alterations

• No conflicts with existing firewalls or routers or any other security softwares

• Eliminates DOS (Denial of Service) and DDOS (Distributed Denial of Service)

attacks

• Provides 24/7 online protection

Operation in Manual Mode:

When the Manual Mode is selected, a connection session must be manually initiated by

pressing the Connect button (Blue/Dark) on the AlphaShield Professional Edition. Once

the Connect button (Blue/Dark) is pressed, the Connect (Center) LED will illuminate

green to indicate to the user that he or she is connected to the Internet or Network. After

an inactivity period of 15 minutes, AlphaShield Professional Edition will disconnect and

enter into a Logical Disconnect state. In order to reconnect, press the Connect button

(Blue/Dark).

The Connect (Center) LED will always indicate the connection status of the AlphaShield

Professional Edition device.

Operation in Auto Mode:

When the Auto Mode is selected, a connection session must be initiated by pressing the

Connect button (Blue/Dark). The Connect (Center) LED will illuminate a solid green to

indicate that the AlphaShield Professional Edition is in a connected state. The duration

of the connection is infinite, regardless of user activity. It is highly recommended that

once the user has completed his or her Internet session, the Disconnect button

(Grey/Light) be manually pressed to cause a Logical Disconnect.

Operation in Lock Mode:

When the Lock Mode is selected, a connection session must be manually initiated by

pressing the Connect button (Blue/Dark) on the AlphaShield Professional Edition. Once

the Connect button (Blue/Dark) is pressed, the Connect (Center) LED will illuminate

Modes of Operation:

Page 6 of 19