Cinegears Espresso Instrucciones rápidas - Página 6

Navegue en línea o descargue pdf Instrucciones rápidas para Accesorios para cámaras Cinegears Espresso. Cinegears Espresso 8 páginas. Digital wireless finger wheel controller

Imprimir página

Espresso Full Instruction

1. Turn On/Off Espresso Controller

Hold the (REC) button for three seconds to turn the espresso controller on/off.

Hold the (REC) button on your espresso controller for three seconds to turn

it on. When your espresso controller is on, hold the (REC) button for three

seconds to turn it off. The number that shows up on your espresso controller

when you turn it on is the espresso controller's battery percentage.

2. Synchronize Espresso Controller and Motor

Hold the button on the motor for three seconds then hold all three buttons on

the espresso controller for three seconds.

Hold the button on your motor that flashes blue for three seconds, when the

button's light turns green, press and hold all three buttons, (REC), (A) and (B) on

your espresso controller for three seconds. In this way, it synchronizes both the

espresso controller and motor together.

3. Automatic Lens Calibration

Hold the (REC) and (A) button for three seconds.

After your espresso controller and motor are synchronized, press and hold

(REC) and (A) button on your espresso controller at the same time for three

seconds, this activates the automatic lens calibration. This option is for the

camera lens that has the hard stops. For the camera lens that does not have

the hard stops, read the following manual lens calibration below.

4. Manual Lens Calibration

Hold the (REC) and (B) button for three seconds. Press the (A) button to rotate

the lens clockwise, then press the (A) button again to stop the rotation and press

the (REC) button to set the start point. Press the (B) button to rotate counter

clockwise and press the (B) button again to stop the rotation, then press the

(REC) button to choose the end point.

After your espresso controller and motor are synchronized, press and hold

the (REC) and (B) button on your espresso controller at the same time for three

seconds until S-1 flashes. Then press and hold the (A) button for three seconds

until the gear rotates. When your camera lens reaches the minimum focus

distance, press on the (A) button again which makes the gear stop rotating.

Then press the (REC) button to set your camera minimum focus distance

point. After you set the minimum focus distance point, S-2 should be flashing.

Then press and hold the (B) button for three seconds, the gear will rotate to the

opposite direction. When it reaches your camera's maximum focus distance point,

you have to press the (B) button again to stop the rotation of the gear. Then

press the (REC) button to set the camera's maximum focus distance. Remember,

you can always press on the (A) button or the (B) button for the micro adjustments

when it passes the camera's focus distance.