Cineo Quantum c80 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ Cineo Quantum c80. Cineo Quantum c80 13 páginas. Ultimate creative lighting tool
Imprimir páginaPower
The Qc80 unit is controlled by an internal power supply. 110 – 220VAC is provided to the unit via a
locking IEC connector, located on the back control panel.
NOTES:
1. Ensure the power cable is disconnected before servicing.
2. Do not connect to a variable supply, such as a dimmer rack.
3. The power cable should be plugged into the power supply before switching the power ON. The power
supply should be switched OFF before removing the power cable.
4. A fuse is located within the IEC connection port. A spare fuse is provided in this same space. If power
is provided, the power switch is ON and the LED light on the power switch is not illuminated, please
disconnect power and check this fuse fi rst.
Displays Screens
The Qc80 control interface includes two backlit displays, each of which communicates valuable yet
discrete information during the operation and setup of the Qc80. They are separated as CONTROL and
STATUS.
Control Screen
The Control screen is an 8-character, daylight-visible
display that shows data adjustment values in Local Mode,
shows DMX signal status in DMX Mode, Radio, Calibrate
and interacts with the Status screen in Menu Mode.
Status Screen
A full-color screen displays the status of each DIM, WHITE,
SATURATION and COLOR control value at all times. The color
ribbons on the top and bottom of the display give a visual
reference for both the WHITE CCT and the COLOR hue. DIM
value and SATURATION are represented as a percentage. In
DMX mode, this display refl ects the current DMX channel
assignment as well as the correlated values for each of the
four channels.
5