ARC ZBCMR-300 Manual - Página 6

Navegue en línea o descargue pdf Manual para Receptor ARC ZBCMR-300. ARC ZBCMR-300 10 páginas. Zigbee dimmer module receiver

Issue Date: 18/04/2022

ACTORY

ESET

Removing from a ZigBee Network through Coordinator or Hub Interface

1. From your ZigBee controller or hub interface, choose to delete or reset the

module receiver as instructed.

2. Once successful reset, the connected output will flash twice to confirm.

Factory reset thru a ZigBee Remote (TouchLink Reset)

1. With the module receiver in Standby Mode, bring the remote within 10cm of

the module receiver.

2. Set the remote into TouchLink Reset procedure to reset the device, please

refer to the corresponding remote manual to operate.

3. There shall be an indication on the remote for successful reset and at the

same time connected output will flash twice to confirm.

Factory reset from the Module Receiver

1. With the module receiver in Standby Mode, hold down 'join' button for 6

seconds, LED on module will quick flash in green.

2. Release button then short press 'join' button again.

3. LED on module will flash red / green twice and connected output will flash

twice to confirm.

4. Module receiver will then return to Join Mode.

PAIRING / FACTORY RESET