ARC IPT-1502 Manual - Página 3

Navegue en línea o descargue pdf Manual para Interruptor ARC IPT-1502. ARC IPT-1502 5 páginas. Ip44 outdoor wireless wall switch

4. Affix wall switch with 2 screws onto wall surface.

5. Cover back silicon rubber, make sure to firmly press and align the rubber to completely cover the

top surface.

aring:

Pairing using LEARNING MODE:

1. First choose the desired receiver(s) that you wish to control.

2. Press the 'Learn' button once (LED will flash), this will now enter learning mode.

3. On the wall switch press the 'ON' button intended to be paired; the load will flash twice to

confirm the wall switch is now paired.

NOTE: Learning mode lasts for 12 seconds; if no signal is given to the receiver then it will

automatically exit learning mode without pairing the device.

To exit learning mode manually, simply press the 'Learn' button again.

！If, during learning mode the load does not flash to confirm, this means that the receiver's memory

is FULL and no further wall switch may be paired unless one of the existing wall switch is first

unpaired (see below).

nparing:

Removing single device:

1. With the receiver that you intent to un-pair press the 'Learn' button once (LED will flash), this

Version 2.