Arc-Zone A-PT-051-PRO Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Posicionadores de válvulas Arc-Zone A-PT-051-PRO. Arc-Zone A-PT-051-PRO 13 páginas. Benchtop welding positioner
También para Arc-Zone A-PT-051-PRO: Manual de instrucciones (17 páginas)
Imprimir página
Installation / Operation
1� Power cord :
Connect power to 100V~240VAC single phase power�
Note: Standard power plug: NEMA 5-15P� Adapters are provided for region with different
power socket�
NEMA-5-15P
2� Grounding stud :
Connect the grounding cable to system's grounding stud�
Warning: Unconnected grounding can cause system damage.
3� Tilt Release / Locking handle :
Turn clockwise to tighten/lock, turn counterclockwise to release�
Warning: Do not turn the locking handle while loads are present on the faceplate.
4� Power switch (SW1):
I = On, O = Off
5� Forward / Reverse switch (SW2):
Reverse (a) / Forward (`)
Reverse
6� Stop:
Press the Stop button to pause all motion and disable all control�
Rotate the Stop button clockwise to reset�
7� Speed Adjustment Knob (VR1) :
Rotate clockwise to increase speed, counter clockwise to decrease speed�
8� Foot switch (F�S):
Steps onto the foot switch to start the faceplate rotation� Release the foot switch to stop the
faceplate rotation�
9� Fuse holder (FS1):
Overload protection� Can be replaced by turning the knob clockwise to open the fuse cover�
10
European Adapter
Forward
Arc-Zone.com, Inc. • 1331 Specialty Dr • Vista, CA 92081 • Tel. 1.760.931.1500
Email: [email protected]
Australian Adapter