CipherLab 8020 Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Dispositivos portátiles CipherLab 8020. CipherLab 8020 12 páginas. Portable terminals
Imprimir página
5. Troubleshooting
a)
Does not power up after pressing POWER key.
Make sure the batteries are loaded and check if the batteries are properly installed with
battery cap firmly closed.
If it doesn't help, change the batteries and try again.
Call for service if problem persists.
b)
Cannot transmit data or programs via the terminal's communication port.
Check if the cable is plugged tightly, then,
Check if host communication parameters (COM port, baud rate, data bits, parity, stop bit)
match with the Terminal's.
c)
Keypad does not work properly,
Turn off the power then press the 7, 9 and POWER keys simultaneously to enter the system
menu.
From the system menu, select the Test and then its sub-item KBD.
Perform the key-in test.
If problem persists, call for service.
d)
Scanner does not scan,
Check if the barcode reader is enabled, or
Check if battery-low indicator is shown on the LCD display. If yes, change the batteries.
If problem persists, call for service.
e)
Abnormal responses,
Open the battery cap and reload the batteries.
Enter system menu by pressing 7, 9 and POWER keys simultaneously.
Check if the terminal can have a correct response by performing tests.
If problem persists, call for service.
10