Arcam fmj UDP411 Manual - Página 9

Navegue en línea o descargue pdf Manual para Reproductor Blu-ray Arcam fmj UDP411. Arcam fmj UDP411 13 páginas. Blu-ray disc player arcam fmj udp411

Imprimir página

settings

menus

The Settings menus allow you to configure all aspects

may become unstable or may not display at all. If this

of your UDP411. The next few pages will go through

happens, connect the UDP411 directly to your display

the menu items and explain their function. The Settings

using the composite video connection in order to see

menus may look daunting if you are new to setting up

the menus. Once the correct video settings have been

home cinema, but the majority of them need only be

entered, a higher-quality connection can be used.

configured once when you first install the system.

Navigating the menus

The only way to view the Settings menus is on your

The UDP411 menus can be navigated by using the

display device (TV or projector) using the on-screen

cursor (arrow) keys on the remote control.

display (OSD) capability of the UDP411. To view

To display the main menu, press the

the OSD for the initial setting up, connect any of the

video outputs to your display device (or AV receiver

Use the

and

keys to navigate up and

connected to your display).

down the main headings in the left-hand panel.

With the main section you require highlighted,

Entering the settings menu

use the

key to enter the middle column.

The

icon is shown on screen when the UDP411

SETTINGS

Use the

and

keys to navigate up and

is first switched on.

down the options in the middle column. Some

options may be greyed out because they are not

currently selectable (e.g. network IP address when

DHCP is used).

Pressing

selects a setting: use the

keys to change the setting.

If the main menu is not currently displayed, press

Press

to confirm the setting. Go back to step 4

SETUP

on the remote control to display it. Note that during the

to adjust any other settings in the current section.

playback of music, video or JPEG files, further button

Press

to return to the previous

RETURN

presses may be required to exit the folder structure.

screen if you want to select another section to

adjust.

With the

icon highlighted, press

to enter

SETTINGS

the Settings menu.

Unstable OSD menu or picture display?

The default UDP411 output video resolution when first

powered up out of the box has been chosen according to

the national standard in the country of purchase.

If the output resolution and frame rate is set to a setting

your display device does not support, the picture

progressive video

480i/576i: 480 lines (NTSC) or 576 lines (PAL)

Standard Definition interlaced video.

NOTE

The HDMI Auto setting may not set the best possible

resolution. If you have a 1080p Full HD display, set

the resolution to 1080p.

TV System – Set the video signal format. If the colour

or picture quality of analogue video appears incorrect,

change this setting. It should not need to be adjusted in

normal use. You can select NTSC (the USA and Canada

video standard), PAL (the Europe, Australia and China

Display

video standard) or AUTO which will output the frame

rate depending on the video material being played.

With the

icon highlighted on your display,

SETTINGS

HDMI Color Space – 'Color Space' refers to the number

press

to show the 'Display' options.

of individual colors that can be displayed on the screen.

If you know the color space capability for the connected

Press

to move to the options in the second column.

TV, you can match it by selecting one of these options.

We recommend you select ' A uto' .

TV Aspect Ratio – Set the aspect ratio (shape) of your

HDMI Deep Color – sets the level of Deep Color

display. Press

to move to the options in the third

processing applied to the HDMI video output. You can

button.

column.

SETUP

select ' A uto' or 'Off ' .

16:9 Normal: Use with widescreen TVs. 4:3

If this option is set to Auto and your TV supports Deep

material is zoomed to fit the wide screen.

Color, the screen displays colors at 30-, 36- or 48-bit

16:9 Full: Use with widescreen TVs. 4:3 material

accuracy (compared to the 24-bit accuracy of standard

is displayed in its original aspect ratio, with

color).

vertical black bars at the sides.

Check the documentation that came with your TV to

4:3 Pan and Scan: Use with 4:3 non-widescreen

see if your TV supports Deep Color. All system HDMI

TVs. 16:9 widescreen content is displayed with

interconnect cables must be Deep Color compatible in

the left- and right-hand sides of the image

order to use Deep Color signals.

cropped to fit the screen (no black bars). The

aspect ratio is maintained (the image is not

and

NOTE

stretched).

If you experience a flickering or abnormal picture

4:3 Letterbox: Use with 4:3 non-widescreen TVs.

after changing the Deep Color setting, connect the

16:9 widescreen content is displayed with black

unit using a Composite video cable and change the

bars at the top and bottom.

setting to a value supported by the display.

Resolution – Set the video resolution of the

and

HDMI

HDMI 1080p 24Hz – You can select ' A uto' or 'Off ' .

outputs.

COMPONENT VIDEO

Movies are recorded on film at a rate of 24 pictures

Auto: Sets the TV's preferred resolution.

(frames) per second. Many of the movies on Blu-ray

4k2k: Ultra HD video.

Discs are placed on the discs at this frame rate. If your

1080p: Full HD progressive video.

TV supports 24 frames per second, but you would prefer

to view the video at a higher frame rate, you should turn

1080i: Interlaced HD video.

off HDMI 1080p 24Hz.

720p: Progressive HD video.

480p/576p: 480 lines (NTSC) or 576 lines (PAL)

E-16

48kHz. See the documentation that came with the

NOTE

receiver or TV.

1080/24p video signals can only be output

96kHz – Select this option if the external

using the

connection.

HDMI

equipment is capable of handling a digital

The connected equipment (AV receiver, TV/

sampling rate of 96kHz

projector) must be 1080/24p compatible.

192kHz – (best quality) Select this option if the

The output resolution must be set to 1080p or

external equipment is capable of handling a

HDMI Auto.

digital sampling rate of 192kHz.

HDMI 3D – To turn the 3D feature (if available) on or

NOTE

off. You can select ' A uto' or 'Off ' .

If the connected equipment (e.g. AV receiver) does

not support 96kHz or 192kHz audio, silence or loud

Audio

noise may result from this setting. If this happens, set

PCM Downsampling to 48kHz.

Digital Out – Sets the audio format output from the

out connections.

OPTICAL

COAXIAL DIGITAL

Dolby DRC – Selects the Dolby Dynamic Range Control

You can select:

mode to 'Off ' , 'On' . or 'auto'

PCM – Outputs the signal as processed audio

Dynamic Range is the range between the loudest sounds

ready for any receiver. Use this when your receiver

and the quietest ones. If set to 'On' you can listen to a

cannot decode the movie soundtrack on the disc.

movie at a lower volume without losing sound clarity.

Bitstream – Outputs the movie soundtrack

Off – No dynamic range compression

without any processing. This option requires

On – Dynamic range compression.

a receiver that supports the movie soundtrack

Auto – DRC is selected by the source material.

format.

Bitstream Re-encode – Combines all audio

SACD priority – Selects the SACD track used.

signals and outputs as DTS or PCM depending on

You can select:

the audio stream on the disc.

Multi-ch – Multi-channel track.

NOTE

2-ch – Stereo track.

The signal at the

output is also determined by

HDMI

the formats supported by the connected equipment.

Language

HDMI Out – Sets the audio format output from the

OSD – Select one language to be used for the On Screen

HDMI

Display (OSD).

connection.

Disc Menu – Set the language used for the Disc Menu

You can select:

and Pop-up Menu. The available languages depend on

PCM – (as above).

the disc. ' A uto' sets the priority language of the disc.

Bitstream – (as above).

Disc Audio – Set the language for the soundtrack. The

Bitstream Re-encode –Automatically selects the

available languages depend on the disc. ' A uto' sets the

HDMI digital signal type according to the audio

priority language of the disc.

stream on the disc.

Disc Subtitle – Set the language used for the subtitles.

Down Sampling – Set the maximum sample rate of

The available languages depend on the disc. 'Off '

audio output from the

OPTICAL

COAXIAL DIGITAL OUT

prevents the display of subtitles.

48kHz – (most compatible) Select this option if

the TV speakers, amplifier, or home theater is not

Network

capable of handling signals over 48kHz sampling

rate. If you do not have an audio receiver or TV

An active, configured Internet connection is required

connected to your player through one of the

if you wish to use BD-Live websites and downloaded

digital audio jacks (optical or coaxial), select

content. See page E-9 for physical connections.

Internet Service Provider (ISP): contact your ISP for

more help.

Connection Type – 'Wired' . Connect a network cable

to the Ethernet jack and into a wired router. 'Wireless' .

IP Setting – You can set your player to automatically

Using a wireless router.

obtain an IP address when it connect to your ISP. Some

providers require that you enter a fixed IP address that

Information – Select and press

to view or set the

does not change: this must be entered using the 'Manual'

network connection parameters:

setting.

MAC Address – Information only

Highlight ' A uto' or 'Manual' , then press

Address Type – Set whether the network settings are

If you selected 'Manual' , the Network Information screen

automatic or set manually.

opens with the IP Address row highlighted. Press a

Auto: Allows the connected router or modem

number button to enter the first digit of the IP address,

to configure the network settings automatically,

then press

to move to the next digit. Continue using

using the network's DHCP server. This setting

the number buttons and the

should be used for the majority of home

the rest of the IP address. When you have finished, press

networks.

. If you need to remove a number you entered, press

Manual: Enter settings manually, for expert users.

CLEAR

The following settings are only available when IP Setting

Wireless Setting – Configure the wireless network.

is set to Manual:

BD-Live Connection – To set the BD-Live Internet

IP Address – Use the cursors to navigate between

access level.

segments and use the

keys on the remote to enter

0-9

The access levels are:

the IP address assigned to your player by your network

Permitted: All BD-Live discs are allowed access to

administrator. Press

to save the setting.

BD-Live websites.

Subnet Mask – Use the cursors to navigate between

Partial Permitted: Allows Internet access to

segments and use the

keys on the remote to enter

0-9

BD-Live content with valid certificates only.

the subnet mask of your network. Press

to save the

Prohibited: Prohibit all BD-Live discs from

setting.

accessing BD-Live websites.

Default Gateway – Use the cursors to navigate between

segments and use the

keys on the remote to enter the

0-9

NOTE

Internet gateway address. Press

to save the setting.

The available on-line functions are disc-

DNS1 – Use the cursors to navigate between segments

dependent.

and use the

keys on the remotel to enter the IP

0-9

Refer to the BD-Live disc instructions for

address of your Primary DNS server. Press

to save

information about accessing on-line content.

the setting.

The UDP411 must be connected to the

DNS2 – Use the cursors to navigate between segments

Internet and set up correctly to allow access

and use the

0-9

keys on the remote to enter the IP

to on-line content. See page E-9 for network

address of your Secondary DNS server. Press

to save

connections and page E-17 for network

the setting.

settings.

Connection Test – When your player tests your Internet

connection, it sends (pings) an IP address.

DLNA Connection – Enable or disable the DLNA

function.

Press

to run a network test. This will also configure

the network settings automatically if they have not been

configured and if automatic configuration (DHCP) is

System

supported by the network.

Screen Saver –sets the duration of a static image display

If this test fails, check the connections to your home

before the screen saver is shown. The options are:

network. Make sure your network cable is securely

5/10/15/20 Minutes. Pressing any button on the unit or

attached to your router and the UDP411. Check that

your router is connected to your cable or DSL modem

remote deactivates the screen saver.

correctly. There may be an issue with your router or

Disc Auto Playback – controls whether an optical disc

E-17

keys to enter