Axxent ISV 1090 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Amplificador Axxent ISV 1090. Axxent ISV 1090 10 páginas. Universal induction loop amplifier

With your choice of this axxent induction loop amplifier you have decided on a high quality, reliable and rugged

part of your sound system. In order to gain the maximum performance, we recommend to carefully read this

manual.

NOTE

The induction loop amplifier ISV1090 is contained in a

standard 19" rack case with mounted rack ears. It may

also be used as a table top unit with its rubber feet.

Rack mounting: when the unit is intended for rack

mounting, you should make sure whether the factory

pre-selected power setting for a coverage of up to 200

square meters would be sufficient for your application

– if not, you will have to remove the housing top first.

axxent e.K. · Technologiezentrum Herzbachtal · Zum Wartturm 15 · 63571 Gelnhausen

fon: +49-6051-9165584 · fax: 9165585 · [email protected] · www.axxent.de

ISV 1090 Universal Induction Loop Amplifier

IMPORTANT!

Because of potential dangerous hazard, the user may

operate only the controls on the front side of the unit.

All internal settings described on the following pages

should be adjusted by qualified service personnel only

– the same applies to opening the metal case (risk of

electric shock).

Internal jumpers on the PCB (printed circuit board)

allow to alter these settings. On page 3 you will find the

instructions for changing the jumper setting.

Surface mounted unit: Please unscrew the rack ears

with the four screws each side. Changing the settings,

of course, is the same as described in the previous para-

graph.

User Manual