CIRCLE FITNESS Sp8 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Bicicleta estática CIRCLE FITNESS Sp8. CIRCLE FITNESS Sp8 17 páginas.

CAUTION: During assembly it is recommended that all bolts be tightened by hand,

upon completing assembly, bolts should then be properly secured using the wrench

provided. To avoid injury, check bolts carefully before use.

Assembly

Step one

Attach the front foot tube (18) first by lifting

up the front of the frame and sliding the front

foot tub under the frame. Align the holes of

the tube and frame then insert bolt (10) from

below. Secure the bolt with washer (9) and

nut (8) use the wrench. Use the same

procedure to secure the rear foot tube (14).

Step two

Attach the handlebar post (22) by inserting

it into the head tube of the frame. Use the

release lever (6) to adjust and tighten the

height to the desired position. Attach the

handlebar slider (23) on the handlebar post

(22), use release lever (17) to adjust and

tighten the handlebar into position.

Install the clamp (67) on the handlebar and

insert the console (64) to the clamp (67),

then connect the cable (65) to the back of

the console (64) and make sure the other

side of the console cable (65) is connected

securely to the cable coming from the

frame. After the cable is connected, put

cable connectors into frame hole then plug

cable stopper (69) to frame.