ABB Jokab Safety Safeball JSTD1 Manual de instrucciones original - Página 6
Navegue en línea o descargue pdf Manual de instrucciones original para Controlador ABB Jokab Safety Safeball JSTD1. ABB Jokab Safety Safeball JSTD1 16 páginas. One/two hand enabling device
También para ABB Jokab Safety Safeball JSTD1: Manual de instrucciones original (15 páginas)
3
Connections
When used as a two-hand device, Safeball is designed for operation together with the safety relay JSBR4 from
ABB/Jokab Safety. This connection can achieve the highest safety level according to EN 574. To achieve the
highest safety level for a two-hand device, dual supervised safety function and simultaneous actuation of the two
Safeballs within 0.5 seconds is required (PL e according to EN ISO 13849-1). For further details, see "Installation
and maintenance" below.
NB: For specific Pluto safety PLC connection examples, refer to Pluto instruction manual.
Caution! Use of any other safety relay or supervision unit may result in a lower safety level and/or the
voltage/current limitations of the JSTD1 switches being exceeded. This may invalidate warranty conditions.
Warning! If the two-hand device is connected to another control unit, it is extremely important to analyse and
determine the safety level of the complete system. The achieved safety level is a combination of the safety relay
and the Safeballs, and must be checked for any combination of operation.
Cable colours
JSTD1-A, -C
1
2
3
JSTD1-A, -C:
1 ) Red
2 ) Black
3 ) Grey
4 ) Blue
2TLC172180M0201, rev. A
2011-10-20
4
1
2
JSTD1-B:
1 ) Black (1)
2 ) White
3 ) Black (2)
4 ) Red
JSTD1-B
3
4
JSTD1-E:
1 ) Black (1)
2 ) White (1)
3 ) Black (2)
4 ) White (2)
6
JSTD1-E
1
2
3
4
www.jokabsafety.com