Axxess AX-AM-MB91 Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para automóviles Axxess AX-AM-MB91. Axxess AX-AM-MB91 8 páginas. Mercedes benz ntg 4.5 with 5.8" & 7" display hdmi and camera interface 2011-up

Imprimir página

Button Configuration

• The buttons in the center console will be used to operate the AX-AM-MB91.

HDMI access

• Select AUX-IN as a source from the factory radio.

• Press and & "Button 1" for 2 secs to switch between the factory screen & the AX-AM-MB91 screen.

• Double tap "Button 1" to exit HDMI mode.

• Double tap "Button 1" to disable the video-in-motion warning message.

Front camera access

• Ensure dip switch 2 is selected to "ON".

• Double tap "Button 1" to activate the front camera.

• Double tap "Button 1" to exit front camera mode.

USER GUIDE

Rear camera access

• The backup camera will automatically activate while the vehicle is in reverse gear.

• Deselecting the reverse gear will activate the front camera, if installed and dip switch 2 is

selected to "ON".

Note:

This camera takes priority over HDMI mode, and front camera mode, but will not deactivate the

front camera. Double tap "Button 1", or drive over 10 mph, to cancel front camera mode

View Version Number

• Press and hold "Button 1" for 8 seconds to enter the firmware information screen.

REV. 6/30/2018 INSTAX-AM-MB91