Axxess ASWC-1 Instrucciones de instalación
Navegue en línea o descargue pdf Instrucciones de instalación para Equipos de grabación Axxess ASWC-1. Axxess ASWC-1 4 páginas. Connections
También para Axxess ASWC-1: Manual del usuario (6 páginas), Instrucciones (5 páginas)
Imprimir página
INTERFACE COMPONENTS
• ASWC-1 Interface
• ASWC-1 harness (12-pin harness with male 3.5mm jack)
• Female 3.5mm connector with stripped leads
AxxessInterfaces.com
ASWC-1 GENERAL INSTRUCTIONS
ASWC-1 General Instructions
Visit
AxxessInterfaces.com
for more detailed information about the product and up-to-date
vehicle specific applications
INTERFACE FEATURES
• One interface does it all, no
• Can be manually programmed
additional interfaces needed
• Designed to be compatible
• Retains settings even after
with all major radio brands
• Auto detects vehicle type, radio
connection, and preset controls
• All connections done at the
• Ability to dual assign steering
wheel control buttons
• Micro-B USB updatable
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Installation Preparation ........................................2
Installation .............................................................2
Programming .........................................................3
Wire Description ....................................................3
for most vehicles
battery disconnection or
interface removal
TOOLS REQUIRED
radio location
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
Attention!
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
Let the vehicle sit with the key
REV. 11/15/18 INSTASWC-1 General Instructions