Axxess AX-ADDCAM Manual de instrucciones de instalación

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Electrónica del automóvil Axxess AX-ADDCAM. Axxess AX-ADDCAM 8 páginas. Camera switching interface

Imprimir página

AX-ADDCAM

INTERFACE FEATURES

• (4) Camera inputs

• Programmable 12V 5-amp switched output (configured through the Axxess Updater program)

• Reverse signal trigger generated via CAN bus communication of the vehicle

• Turn signal trigger generated via CAN bus communication of the vehicle

• (4) Programmable camera control wires (configured through the Axxess Updater program)

• Can also be manually controlled, and used along with an aftermarket radio

• VSS (Vehicle Speed Sense) input and output

• Micro "B" USB updatable

INTERFACE COMPONENTS

• AX-ADDCAM interface

• AX-ADDCAM harness

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell caps, etc.)

AxxessInterfaces.com

AX-ADDCAM

I N S TA L L AT I O N I N S T R U C T I O N S

Introduction............................................................2

Connections to be made .......................................2

Configuring the AX-ADDCAM ............................. 3-5

Installing the AX-ADDCAM .....................................5

Programming the AX-ADDCAM .............................6

Connector pin-out (20-pin) ..................................7

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

REV. 5/3/18 INSTAX-ADDCAM

Axxess AX-ADDCAM Manual de instrucciones de instalación

TABLE OF CONTENTS