Axxess AX-JP901 Manual de instrucciones de instalación

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Electrónica del automóvil Axxess AX-JP901. Axxess AX-JP901 8 páginas. Jeep renegade data interface with swc & factory display retention2015

Imprimir página

Jeep Renegade Data Interface with SWC & Factory Display Retention

INTERFACE FEATURES

• Provides accessory power

• Designed for non-amplified models

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains parking sensor chimes

* Attention! The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn't have a backup camera

Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.

INTERFACE COMPONENTS

• AX-JP901 interface

• ASWC-1 interface

• AX-JP901 harness

• ASWC-1 harness

• Female 3.5mm connector with stripped leads

• Chime speaker

AxxessInterfaces.com

2015

• Retains balance and fade

• Retains most of the vehicle settings that was displayed on the

factory radio *

• Micro "B" USB updatable

AX-JP901

I N S TA L L AT I O N I N S T R U C T I O N S

TABLE OF CONTENTS

Connections to be made ....................................2-3

Installing the AX-JP901 interface ..........................3

Programming the ASWC-1 interface ................. 3-4

Screen operation ................................................4-6

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.)

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

REV. 4/10/18 INSTAX-JP901