Epson 4000 - Stylus Pro Color Inkjet Printer Manual Start Here - Página 2

Navegue en línea o descargue pdf Manual Start Here para Impresora Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 6 páginas. Print engine
También para Epson 4000 - Stylus Pro Color Inkjet Printer: Folleto y especificaciones (4 páginas), Manual de referencia del producto (38 páginas), Información sobre el producto (13 páginas), Boletín de asistencia sobre productos (17 páginas), Información importante (2 páginas), Garantía limitada (12 páginas), Manual de consulta rápida (11 páginas), Folleto y especificaciones (12 páginas), Folleto y especificaciones (6 páginas), Manual de instalación (16 páginas)

Epson 4000 - Stylus Pro Color Inkjet Printer Manual Start Here

Install Ink

Use the ink cartridges that came with your printer for initial ink charging. During the initial
installation process, it is normal for up to one-third of the ink in each cartridge to be used.
1
Press the
2
Press both ink compartment covers to open them.
3
Raise both ink levers.
4
Remove each ink cartridge from its package and
gently shake the cartridge.
5
Install the ink cartridges in the printer. Hold
each cartridge with the arrow pointing toward
the printer, then insert it into its slot. Make sure
you insert each cartridge in the correct slot.
6
After installing all 8 cartridges, lower the ink levers.
The printer begins charging the ink delivery system
and the
Pause light flashes.
7
After approximately 2 minutes, ink lever messages
appear on the LCD. follow the instruction to raise
or lower the ink levers.
Caution:
Charging takes about 8 minutes. Never turn off the printer,
release the paper lever, or open the cover while the
or you may damage the printer.
8
When READY appears on the LCD display, charging is complete. Close the ink
compartment covers.
Caution:
Always turn off the printer using the
the LCD display turns off. This ensures that the print head is safely capped.
Power button to turn on the printer.
Pause light is flashing,
Power button. Then wait until
Power button