Epson 4000 - Stylus Pro Color Inkjet Printer Manual de consulta rápida - Página 7

Navegue en línea o descargue pdf Manual de consulta rápida para Impresora Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 11 páginas. Print engine
También para Epson 4000 - Stylus Pro Color Inkjet Printer: Folleto y especificaciones (4 páginas), Manual de referencia del producto (38 páginas), Información sobre el producto (13 páginas), Manual Start Here (6 páginas), Boletín de asistencia sobre productos (17 páginas), Información importante (2 páginas), Garantía limitada (12 páginas), Folleto y especificaciones (12 páginas), Folleto y especificaciones (6 páginas), Manual de instalación (16 páginas)

Epson 4000 - Stylus Pro Color Inkjet Printer Manual de consulta rápida
Replacing Printer Parts (continued)
Replacing Printer Parts (continued)
5
Hold down the side pin, as shown, then turn the
latch to the right.
6
Release the side pin and carefully remove the
cutter blade.
7
Insert the new cutter blade.
8
Hold down its side pin and secure it with
the latch.
9
Close the top cover. The carriage returns to the
home position and the cutter replacement is
complete.

Replacing the Maintenance Tank

You need to replace the Maintenance Tank
(part # C12C890071) when you see MNT TNK FULL
or NEAR FULL on the LCD display. The ink light
also turns red.
1
If you are using 220 ml ink cartridges, remove the
four cartridges on the right. Close the ink
compartment cover.
2
Pull out the maintenance tank as shown.
Caution:
Do not tip the tank, or ink may spill out.
3
Place the used tank in the plastic bag included with
the new tank.
4
Insert the new tank.
5
Replace any ink cartridges you removed.
7