Axxess RFASWC Manual de instrucciones de instalación - Página 9
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Electrónica del automóvil Axxess RFASWC. Axxess RFASWC 12 páginas. Wireless swc universal add-on
También para Axxess RFASWC: Manual de instrucciones de instalación (12 páginas)
Imprimir página
the instructions included with the radio. Contact the radio vendor if you have
any questions with this.
Note: This does not apply to JVC and Kenwood radios.
5) For Kenwood radios, make sure that the RFASWC displays that a Kenwood
radio is being used; reference to Radio Legend. If the Radio Legend shows a
JVC radio instead, then reference to the Changing Radio Type to force program
the RFASWC to display as a Kenwood.
Tip: Some Kenwood radios have a feature called Remote Sensor. If your radio
has this feature, ensure it is turned on. If it is on, turn it off, then back on.
6) For Alpine radios, remove the 3.5mm jack from the radio, reprogram the
RFASWC with the jack removed, and then reconnect the 3.5mm jack back into
the radio.
Tip: Some Alpine radios have a feature that turns the remote to either the back,
or the front. If you have one of these radios, ensure the sensor is on the rear
setting. If the setting is on the rear, turn it to the front, then back to the rear.
7) For Pioneer and Sony radios, if the RFASWC works, but the buttons are out of
order, or become out of order; this could be caused by the 3.5mm jack on the
RFASWC not seating properly, slipping out, or dirt on the contacts. Additionally,
sometimes this can be intermittent. Remove any dirt on the contacts, reinsert
the jack firmly into the radio, and then put a stress loop on the 3.5mm cable
RFASWC
Troubleshooting
to prevent this from happening in the future. Also, if anything is prohibiting the
jack from seating all the way in, such as a heatsink, lightly trim some of the
plastic from the 3.5mm jack as needed.
If you have performed any of the steps above, reset the RFASWC by pressing the
reset button on the RFASWC for 3 seconds, release, then wait until the LED goes
solid (approximately 20 seconds).
LED Feedback Legend
1. Eclipse (Type 1)
2. Kenwood
3. Clarion (Type 1)
4. Sony and Dual
5. JVC
6. Pioneer and Jensen
7. Alpine
9
8. Visteon
9. Valor
10. Clarion (Type 2)
11. Metra OE
12. Eclipse (Type 2)
13. LG
14. Parrot
15. XITE