Epson 50 - Artisan 50 - Printer Manual rápido - Página 29
Navegue en línea o descargue pdf Manual rápido para Impresora Epson 50 - Artisan 50 - Printer. Epson 50 - Artisan 50 - Printer 36 páginas. Epson artisan 50: quick start
También para Epson 50 - Artisan 50 - Printer: Especificaciones (2 páginas), Manual Start Here (9 páginas)
Imprimir página
Notices
Important Safety Instructions
Before using your printer, read and follow these safety instructions:
■
Be sure to follow all warnings and instructions marked on the printer.
■
Use only the type of power source indicated on the printer label.
■
Use only the power cord that comes with the printer. Use of another cord may cause
fires or shock. Do not use the cord with any other equipment.
■
Place the printer near a wall outlet where the plug can be easily unplugged.
■
If you won't be using the printer for a long period, unplug the power cord from the
electrical outlet.
■
Always turn off the printer using the P power button, and wait until the P power
light stops flashing before unplugging the printer or cutting off power to the electrical
outlet.
■
Avoid plugging the printer into an outlet on the same circuit as a photo copier or air
control system that regularly switches on and off, or on an outlet controlled by a wall
switch or timer.
■
Do not let the power cord become damaged or frayed.
■
If you use an extension cord with the printer, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord's ampere rating.
Also, make sure the total ampere rating of all devices plugged into the wall outlet does
not exceed the wall outlet's ampere rating.
■
Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■
Leave enough room around the printer for sufficient ventilation. Do not block or
cover openings in the case or insert objects through the slots.
■
Do not place or store the printer near a radiator or heating vent, in a dusty or moist
environment, in direct sunlight, or outdoors.
■
Keep the away from potential sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
■
Do not use aerosol products that contain flammable gases inside or around the
printer. Doing so may cause fire.
29
Notices