Axxess AX-AM-AU95 Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Piezas de automóviles Axxess AX-AM-AU95. Axxess AX-AM-AU95 8 páginas. Dmi and camera interface

Imprimir página

Button Configuration

• There are (3) different sets of factory buttons used to operate the AX-AM-AU95 depending

on the trim level of the vehicle.

HDMI access

• Select AUX-IN as a source from the factory radio.

• Press and hold button "A" for 2 seconds to switch between the factory screen and the

AX-AM-AU95 screen.

• Press button "A" to disable the video-in-motion warning message.

Front camera access

• Ensure dip switch 2 is selected to "ON".

• Press and hold button "B" for 2 seconds to activate the front camera.

Type 1

USER GUIDE

Type 2

Rear camera access

• The backup camera will automatically activate while the vehicle is in reverse gear.

• Deselecting the reverse gear will activate the front camera, if installed and dip switch 2 is

selected to "ON".

Note: This camera takes priority over HDMI mode, and front camera mode. But will not deactivate

the front camera. The front camera image will disappear after the vehicle reaches 10 mph.

View Version Number

• Press and hold button "A" for 8 seconds to enter the firmware information screen.

Without Steering

Wheel Controls

REV. 6/30/2018 INSTAX-AM-AU95