DigiDesign 96 I/O Manual - Página 11

Navegue en línea o descargue pdf Manual para Equipos de grabación DigiDesign 96 I/O. DigiDesign 96 I/O 19 páginas. Version 8.0

96 I/O Back Panel

96 I/O back panel

Analog Inputs

The 96 I/O has eight balanced, 1/4-inch TRS

connectors for analog audio input connections.

These inputs feature 24-bit A/D converters.

The TRS inputs are wired as follows:

96 I/O input wiring for balanced connections

Tip

Hot (or +)

Ring

Cold (or –)

Sleeve

Ground

Input operating levels are switchable between

+4 dBu and –10 dB(V) operation. (For instruc-

tions, see the HD Setup Guide.)

These connectors also support unbalanced con-

nections. Unbalanced connections are sup-

ported with the use of standard 1/4-inch mono

phone plugs.

Analog Outputs

The 96 I/O has eight balanced/unbalanced,

1/4-inch TRS connectors for analog audio out-

put connections. These outputs feature 24-bit

D/A converters.

All eight output channels are continuously ac-

tive. Output operating levels are switchable be-

tween +4 dBu and –10 dBV operation. (For in-

structions, see the HD Setup Guide.)

Unbalanced connections are supported with the

use of standard 1/4-inch mono phone plugs.

AES/EBU Digital In and Out

These are balanced, three-conductor XLR con-

nectors that accept and output a stereo, 24-bit

AES/EBU digital data stream. These two ports

support up to 96 kHz sample rates.

Chapter 2: 96 I/O Hardware Overview