Axxess OESWC-7552-RF Manual de instrucciones de instalación - Página 4

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Piezas de automóviles Axxess OESWC-7552-RF. Axxess OESWC-7552-RF 8 páginas. Axxess interface

Imprimir página

for 2 seconds.

5. This is the end of the auto detection stage. If the OESWC

TRANSMITTER detected the vehicles radio successfully the led will

light up solid red.

6. Make sure the steering wheel control buttons function correctly in the

vehicle and enjoy your radio.

So what if the led does not light up solid red? Check out troubleshooting

section below.

Troubleshooting the Auto Detect Mode

So you tried the auto detect feature and at the end the led did not stay on

solid red, it started flashing. That means the OESWC TRANSMITTER did

not detect the vehicles radio. Follow these couple steps to determine what

happened:

First some basic steps:

1. Verify that you have 12 volt accessory and a good ground to the

OESWC interface.

2. Verify that the battery is good on the OESWC transmitter.

3. Refer to the "Setting up the OESWC transmitter" section of this

manual and repeat those steps.