Axxess TYTO-01 Manual de instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Amplificador Axxess TYTO-01. Axxess TYTO-01 8 páginas. Toyota digitalamplifier interface 2001-2015
Imprimir página
APPLICATIONS
LEXUS
ES Series
2007-2012
ES Series (w/ multi disc)
2002-2006
GS Series
2001-2005
IS Series
2002-2005
LS Series
2001-2006
RX Series
2004-2008
SC Series
2002-2010
TOYOTA
4-Runner
2003-2013
Avalon
2005-2010
Avalon
2011-2012
(Camry) Solara
2004-2008
Camry (w/o nav)
2012-2013
Camry
2007-2011
Corolla
2003-2011
2
TOYOTA (Cont.)
FJ Cruiser
2011-2014
Highlander
2008-2013
Matrix
2005-2012
Prius 3rd Gen (w/o nav)
2012-2015
Plug-In (PHV) (w/o nav)
2012-2015
Prius
2004-2011
Rav-4
2004-2014.5
Sequoia
2005-2012
Sequoia (w/o nav)
Sienna
2004-2014
Tacoma
2005-2013
Tundra
2006-2013
Tundra (Double Cab)
2004-2005
Venza (w/ SD card based nav)
2013-2014
Venza
2009-2012
From the 16-pin harness with stripped leads to the aftermarket radio:
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the Green wire to the radio's left rear positive speaker output.
• Connect the Green/Black wire to the radio's left rear negative speaker output.
2013
• Connect the Purple wire to the radio's right rear positive speaker output.
• Connect the Purple/Black wire to the radio's right rear negative speaker output.
• Connect the Blue/White wire to the amplifier turn on wire. This wire must be connected to
hear sound from the factory amplifier.
• Tape off and disregard the following (6) wires, they will not be used in this application:
Red, Brown, Light Green, Blue/Pink, Green/Purple, Orange/White
CONNECTIONS
Continued on the next page