Axxess AX-DSP Manual de instrucciones
Navegue en línea o descargue pdf Manual de instrucciones para Cables y conectores Axxess AX-DSP. Axxess AX-DSP 10 páginas. Axxess digital signal processor
Imprimir páginaAxxess Digital Signal Processor
INTERFACE FEATURES
• 31 Band graphic EQ
• 6 Inputs and 6 Outputs, including front, rear and subwoofer
• Selectable High and Low level inputs
• Front, rear and subwoofer outputs have an independent two-way
crossover in-line with the EQ
• Front and rear outputs can be delayed independently up to 10ms
• Easy behind the radio installation
• Can be used with OE and aftermarket radios
INTERFACE COMPONENTS
• DSP interface
• Universal harness
axxessinterfaces.com
• Chime control for vehicles with amp-generated chimes (When
retaining OEM radio)
• Retains Sonar sensors in vehicles where the tone is provided by the
amplifier(when retaining OEM radio)
• Clipping detection and limiting circuits
• Retains OE voice prompts (SYNC and OnStar)
• Settings adjusted via Bluetooth application, compatible with both
Android and Apple devices
• Read, Write, and Store your configuration for future recall
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
AX-DSP
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Installation Options ...............................................2
Installing the AX-DSP .............................................2
(20-pin Microfit)..................................................3
(16-pin Microfit) ..................................................4
DSP application .................................................4-10
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 8/10/17 INSTAX-DSP