Circuit ECX03011 Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Coche de juguete motorizado Circuit ECX03011. Circuit ECX03011 19 páginas. 1/10 4wd electric stadium truck
Imprimir páginaELECTRONIC SPEED CONTROL (ESC)
Programming: The ESC comes with two jumpers pre-installed in
the REV: ON and BATT: Ni-MH confi gurations.
To disable reverse or change battery type to Li-Po, disconnect the
jumper from the default port and connect it to the desired port.
Power off the ESC, then power it back on.
If the jumpers are lost or not installed, the ESC will default to
REV: ON and BATT: Li-Po.
Operation
Stop
Forward
Forward (full speed)
Reverse
Brake
Brake (full brake)
Ni-MH/Ni-Cd Battery
2S Li-Po Battery
ESC Ready
Battery Low Voltage
Overheat
ELECTRICAL LAYOUT
Part #
Description
A
DYN1172
Motor
B
DYN1060EC
Battery 7.2V
C
SPMS603
Waterproof Steering
Servo
D
SPMSR201
Receiver
E
DYNS2211
Waterproof Electronic
Speed Control (ESC)
F
Channel 1
G
Channel 2
For correct operation, Channels 1 and 2
must be used as shown in the wiring diagram.
The motor can be disconnected from the ESC
at the connectors in the wiring.
MAINTENANCE
LED Status
OFF
Blinks
Solid
Blinks
Blinks
Solid
Blinks
Blinks
A
B
C
LED
Sound at Power UP
1 Short Beep
2 Short Beeps
1 Long Beep
EC3
EC3
D
EN
E
G
F
9