Epson A381H Manual de impresión - Página 4

Navegue en línea o descargue pdf Manual de impresión para Impresora Epson A381H. Epson A381H 17 páginas. Epson printer parts list

Imprimir página
Epson A381H Manual de impresión
PictureMate Snap (PM 240)
3. Insert the memory card into the correct slot, as shown.
Insert just one card at a time.
Top slot:
™
SD and SDHC
™
miniSD
and miniSDHC *
microSD and microSDHC *
MMC (MultiMediaCard)
xD-Picture Card
xD-Picture Card (Type M and Type H)
Sony Memory Stick
Memory Stick Duo *
Memory Stick PRO
Memory Stick PRO Duo
MagicGate Memory Stick
MagicGate Memory Stick Duo
* Requires adapter
Bottom slot:
™
Microdrive
CompactFlash (Type I and II)
Note: PictureMate can't read multiple cards at once.
4. Push the card in carefully until it stops (it won't go in all the
way).
When the card is in, the memory card light comes on and
begins to flash.
Caution: Do not remove a card while the memory card light is
flashing; you may lose photos on your card.

Removing a Memory Card

When you are ready to remove a memory card, make sure the
memory card light is not flashing.
Caution: Do not remove a card while the memory card light is
flashing; you may lose photos on your card.
PictureMate Snap (PM 240)
4 -
Memory
card light
™
™
*
To remove a card from the top slot, push in the card and
release it, then pull it straight out of the slot.
To remove a card from the bottom slot, push in and release
the card release button so it pops out. Then push in the
button again to eject your card and pull it straight out of the
slot.

Viewing Photos

PictureMate's photo viewer screen makes it easy to select the
photos you want to print.
Total number of prints
Layout
icon
Guide to
available
options
Left
selection
button
(selects
current
option on
screen)
Navigation buttons
for selecting photos or settings
Note: You can adjust the angle of the photo viewer screen by raising
or lowering the top of the screen. Be sure to lower the screen before
closing the printer lid.
8/06
Number of copies of this photo
Icons showing
selected settings
Right selection
button (selects
current option on
screen)