Epson ActionPrinter 3250 Manual - Página 3
Navegue en línea o descargue pdf Manual para Impresora Epson ActionPrinter 3250. Epson ActionPrinter 3250 9 páginas. Epson actionprinter 3250: quick reference
También para Epson ActionPrinter 3250: Tarjeta de referencia rápida (6 páginas)
Imprimir página
Environmental
Temperature Operation:
5 to 35°C (41 to 95°F)
Storage:
-20 to 55°C (4 to 131°F)
Humidity (without condensation):
Operation:
30 to 80% RH
storage:
5 to 85% RH
Safety approvals
Safety Standards:
US
model:
UL1950 with D3, CSA22.2 #220
European model: EN 60950 (TUV), IEC 950 (SEMKO, DEMKO,
NEMKO, SETI)
RFI:
US model:
FCC class B
European model: VDE0871, CISPR PUB.22
Interface specifications
Your printer is equipped with an 8-bit parallel interface with
the following characteristics:
Data format: 8-bit parallel
Synchronization:
STROBE
BUSY and
Handshake timing:
Signal level:
TTL compatible
Connector:
36-pin 57-30360 Amphenol connector or
equivalent
Default
settings
Item
Top of farm position
Current paper position or setting in the default
setting mode.
Page length
Single sheets: 65 lines for A4-size paper,
Continuous paper: Subject to control panel
Left and right margins
Canceled
1/6-inch tine spacing
Line spacing
Character size
10.5 point
Horizontal tab positions
Every eight characters
Font selection
Last font selected on control panel
Special printing effects
Canceled (except condensed printing)
Download character set
Hardware initialization: cleared
Software initialization: deselected only
In addition,
hardware initialization clears the data buffer.
24-Pin Printers
pulse
ACKNLG
signals
Default setting
61 lines for letter-size paper, 22 inches for
manual insertion
setting in the default-setting mode
Character Tables
These character tables are selected with the default-setting mode or by wing a
software command. AU the tables are the same for hex codes 00 through 7F.
Therefore, only first table is shown completely. The rest of the tables show only the
characters for hex codes 80 through FF.
For all character tables except the italic character table, the ESC 6 and ESC 7
software commands let you select whether hex codes 80 to 9F are characters (EX 6)
or control codes (ESC 7).
PC 437 (USA, standard Europe)
Character available with ESC (^
To print the characters in the table below, you must first send the ESC (^ command.
3/17/92
ActionPrinter 3250
AP-3250-3