Arch Environmental Equipment Saber Max Manual de instrucciones de instalación

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Limpiador ultrasónico de joyas Arch Environmental Equipment Saber Max. Arch Environmental Equipment Saber Max 4 páginas. Belt cleaner

Imprimir página

Arch Environmental Equipment, Inc.

SABER MAX BELT CLEANER

C l o s e Wi n d o w

THE INSTALLATION OF THE SABER MAX BELT CLEANER IS VERY SIMPLE.

SHUT DOWN AND LOCKOUT CONVEYOR BEFORE

STEP 1

Determine the diameter of the head pulley and the thickness of the conveyor belt.

Example: head pulley diameter = 36"(914.4mm), belt thickness = 1 ¾" (44.45mm).

Take one half of the head pulley measurement (in this case 18"(457.2mm)) and

add the belt thickness. This will give an effective radius of 19 ¾" (501.65mm). If

the pulley is smaller than 22" diameter, you cannot use the Saber MAX on this

application.

STEP 2

To this number add dimension "A" ( 4 1/4" (107.95mm)). This will give you the "Z"

dimension. See fig. 1. To assist in achieving this spacing, urethane installation

rings have been provided with the cleaner. Use them as directed in step 7.

INSTALLATION INSTRUCTIONS

IT REQUIRES ONLY A FEW TOOLS AND LITTLE TIME.

THE TOOLS & RESOURCES REQUIRED ARE:

1. STRAIGHT EDGE

2. LEVEL

3. TAPE MEASURE

4. CUTTING TORCH

PERFORMING ANY MAINTENANCE

5. WELDING EQUIPMENT

6. CHALK

7. ADJUSTABLE WRENCH

8. STRING (36" or more)

P r i n t