Epson C11C640001 - LX 300+II B/W Dot-matrix Printer Manual del usuario - Página 40
Navegue en línea o descargue pdf Manual del usuario para Impresora Epson C11C640001 - LX 300+II B/W Dot-matrix Printer. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 50 páginas. Epson lx-300: user guide
También para Epson C11C640001 - LX 300+II B/W Dot-matrix Printer: Manual (17 páginas)
Imprimir página
Light
Beep
status
pattern
f Paper Out
•••
n Pause
•••
•••
f Pause
–
f All the
•••••
lights on the
control
panel
n = on, f = flashing
••• = short series of beeps (three beeps)
••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the
corresponding function is not available.
40
Troubleshooting
Problem
Solution
Continuous paper is not fed back to the standby
position.
Tear off the printed document at the perforation;
then press the Load/Eject button. The printer
feeds the paper to the standby position. Press the
Pause button to turn off the Pause light, if
necessary.
A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet.
Then press the Pause button to turn off the Pause
light, if necessary.
Paper is jammed in the printer.
Clear the paper jam as described in the next
section.
The print head is overheated.
Wait a few minutes; the printer resumes printing
automatically once the print head has cooled.
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the error
recurs, contact your dealer.