3Com NBX Networked Telephony Systems, NBX R6.0.14 Release Notes
The Hold, Transfer, and Conference buttons no longer stop working on a 3103 Manager's Telephone
during the following conditions:
Place a call from 3103 phone to another phone.
Press the soft key for the Actions icon on the right to display the Actions menu.
Press the soft key for the system appearance button on the left.
The Actions menu screen disappeared but the Hold, Transfer, and Conference buttons would stop
working and the Actions menu option disappeared.
The same situation occurred if you pressed the system appearance button while you had the
Directory menu or the MWI Retrieve menu active on a 3103 Manager's Telephone. (ID 25258)
A 3103 Manager's Telephone now displays the Caller ID name when an external call comes in
through a Hunt Group. (ID 31188)
When one telephone is actively using the display panel Directory feature, changes made by the NBX
administrator are now available to other telephones. (ID 31336)
If you install the Complement Attendant Software application (CAS) but you do not install the NBX
TAPI Service Provider (NBXTSP), and you elect to launch CAS after the installation is complete, CAS
no longer fails to start. (ID 25240 and ID 24547)
On an NBX 100, switching a call from the speaker to the handset no longer occasionally results in
one-way audio. (ID 32498)
3C10165D E1 Digital Line Cards and 3C10116D T1 Digital Line Cards now support the NBX IP On-
the-Fly feature and you no longer need to assign a static IP address or use DHCP to assign an IP
address to the cards. If you want the cards to use IP On-the-Fly, you must remove the static IP
address. (ID 3700)
Global Call IDs no longer appear more than once in call reports. (ID 31099)
When a Primary Bridged Station Appearance drops off a conference call that is being carried by a
Virtual Tie Line (VTL) connection, the other two parties on the conference no longer lose audio or
experience one-way audio. (ID 29446)
Original Caller ID information does not replace ALCD text when a Menu is active on the telephone
display panel.
For example:
The system sends an ALCD text string to a user on an active call. The user interacts with the
menu interface on the display panel and then finishes using the menu.
When the user exits from the menu system on the phone, the ALCD text instead of the original
Caller ID appears on the display panel.
This features works as designed and is now documented correctly in the NBX 6.0 TAPI Developer's
Guide. (ID 25267)
The lineMakeCall() function now returns an error if an active call unknown to the application is already
active on the line. (ID 29929)
The NBXTSP no longer occasionally hangs when an application deallocates a call that is not in the
idle state with lineDeallocateCall(). (ID 45858)
Known Anomalies and Considerations in NBX R6.0.14
3Com Telephones
On a system where Account Codes are required, if you initiate a conference or a transfer that includes
an external number using a 3103 Manager's Telephone, the display panel displays an incorrect error
message. For example, you use a 3103 Manager's Telephone to place an internal call, and then you
Page 7
Imprimir página