Ayce 0103 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Luz de inundación Ayce 0103. Ayce 0103 5 páginas. Floodlight portable with tripod

Imprimir página

Read this manual carefully before using this product and check whether there are any

damaged parts. The product cannot be installed in case of damages. Keep this manual for

further reference.

SAFETY WARNINGS:

a) Keep this product out of reach of children and unauthorized users.

Before using the device, make sure that all screws have been tightened.

c) This unit can become extremely hot whilst in operation; do not touch until it has had time

to cool down.

d) When the light bulb is burning or not completely cooled down, please do not touch it.

e) Mark sure there is adequate ventilation to aid heat dissipation.

Minimum distance from lighted objects 1 m.

g) For outdoor use.

If the glass is broekn, replace it immediately.

i) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualiﬁed persons in order to avoid a hazard.

j) The lighting direction can not be adjusted to down ward.

EXPLANATION OF SYMBOLS:

Conforms to relevant European requirements for the product.

The crossed-out wheeled bin symbol indicates that the item should be disposed of

separately from household waste. The item should be handed in for recycling in

accordance with local environmental regulations for waste disposal. By separating a

marked item from household waste, you will help reduce the volume of waste sent to

incinerators or land-ﬁlls and minimize any potential negative impact on human health

and the environment.

TECHINICAL DATA:

Floodlight with tripod

Type

0103

Rated voltage

220-240 V ~ 50 Hz

Rated power

Max.150 W

IP54

IP Level

R7s 120 W / 78 mm

Lamp

Cable

H05RN-F 3G 1.0mm²

Weight

1.08 kg

Dimension of

133 x 92 x 4 mm

protective glass

CLEANING:

Turn off the power to clean the lamp and let the lamp cool down. Clean the lamp with soft

cloth (if necessary slightly moistened). Never use alcohol or a similar solvent, this could

damage the lamp.

INSTALLATION:

Caution: Before installation, please make sure the plug is not connected to the socket.

1. Unscrew the angle adjustment screw knob (D) from the stand. Insert the stand into the

ﬂoodlight bracket (G).

2. Align the holes of the bracket and the stand. Adjust the ﬂoodlight until the desired angle.

Then Insert and tighten angle adjustment screw knob (D).

3. CAUTION: Do note install the ﬂoodlight bracket to other tubular surface!

4. Note: Check the ﬂoodlight is secure and the stand is stable and has a ﬁrm footing. Prevent

the cable from contact with sharp objects, chemicals or hot surfaces.

5. The halogen bulb in the ﬁtting will burn through quickly if the ﬁtting is ﬁxed under an angle

of more than 4°.

MAX 4°

INSTALLATION OF THE BULB:

a) Before installing bulb, please make sure the plug is not connected to the socket.

b) Loose the upper scres from the light guard and open it.

c) Take the bulb our of it's packaging. Do not touch the bulb with bare hand. Use a towel

to fix the bulb into the fitting. First press one side of the fitting against the metal pin and shift

the pin backwa

rds so that you can press the other side of the bulb against the metail pin.

d) After chanding the light bulb, please pay attention to the correct positioning of the seal gasket.

e) Fix the light guard by tightening the screw. Do not over tighten which may damage the glass.

A. Handle

B. Upper screws

C. Protective grill

D. Angle adjustment screw knob

E. Stand

F. Mains cable

G. Floodligt bracket

V200323