Epson DFX-9000 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Impresora Epson DFX-9000. Epson DFX-9000 28 páginas. 9-pin dot matrix printer
También para Epson DFX-9000: Manual del usuario (28 páginas), Especificaciones (2 páginas), Actualización del firmware (1 páginas), Referencia rápida (12 páginas), Especificaciones (2 páginas), Empieza aquí (2 páginas)

Imprimir página
Epson DFX-9000 Manual del usuario
http://www.ochimp.com
Chapter 3
Using the Control Panel
This chapter describes the buttons and lights on the control panel, plus:
❏
Selecting a font and pitch
❏
Changing the printer's default settings
❏
Locking the control panel buttons

Buttons and Lights

a
b
c
d
e
Button/Light
Function
a
Front Tractor
On when the front tractor is selected. The light is green when
Select light
paper is loaded, or red when the tractor is out of paper.
b
Rear Tractor
On when the rear tractor is selected. The light is green when
Select light
paper is loaded, or red when the tractor is out of paper.
c
Front/Rear
Selects the front or rear tractor. If you have been using paper
tractor button
loaded on one tractor, first remove the printed output before
pressing this button to switch the tractor.
http://www.ochimp.com
f
g
h
i
j
k
Button/Light
d
Font (ItemU)
button
e
Reset
(Font and Pitch)
buttons
f
Pitch (ItemD)
button
g
Tear Off (SetU)
button
m
Tear Off light
h
Menu
(Tear Off and
Top of Form)
buttons
i
Top of Form
(SetD) button
Top of Form light
l
j
LF/FF Load
button
k
Micro Feed
buttons
For More Info
Click Here ===>
Function
Selects one of the fonts. See "Selecting a Font and Pitch" on
page 18.
In SelecType mode and Default-setting mode, you can press
the ItemU button to select the previous menu or option.
See page 19 or page 21 for details.
When you press both the Font and Pitch buttons
simultaneously, the printer clears its buffer and restores its
default settings.
Selects one of the pitch settings. See page 18 for more
information.
In SelecType mode and Default-setting mode, you can press
the ItemD button to select the next menu or option.
See page 19 or page 21 for details.
Feeds continuous paper forward to the tear-off position.
In SelecType mode and Default setting mode, you can press
the SetU button to select the previous option for a menu item.
See page 19 or page 21 for details.
On when paper is in the tear-off position.
When you press the Tear Off and Top of Form buttons at the
same time, the printer enters or exits the SelecType mode and
you can set the various printer settings. See page 19 or page 21
for details.
Enters the top-of-form position mode and sets the new
top-of-form position after it has been adjusted with the
Micro Feed buttons.
In SelecType mode and Default-setting mode, you can press
the SetD button to select the next option for a menu item.
See page 19 or page 21 for details.
On when the printer is in top-of-form and tear-off modes.
Loads continuous paper when the printer is out of paper.
Feeds paper line by line when pressed briefly.
Advances continuous paper to the next top-of-form position
when held down for a few seconds.
Adjust the paper position, such as the top-of-form position and
tear-off position.
Using the Control Panel 17