Architectural Area Lighting PROS Providence Small Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Luz exterior Architectural Area Lighting PROS Providence Small. Architectural Area Lighting PROS Providence Small 15 páginas. Led upgrade kit

Imprimir página
INSTALLATION INSTRUCTIONS
WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER
REPRODUCTIVE HARM. THOROUGHLY WASH HANDS AFTER INSTALLING, HANDLING, CLEANING OR OTHERWISE TOUCHING THIS PRODUCT.
WIREWAY
3.5
O
(2)
7/16"
CLEARANCE

MOUNTING PATTERN

(ORIENTATION)
CAPTIVE
SCREWS
DOME DETAIL
FIXTURE
FRONT OF
FIXTURE
CONNECTORS
INSTALLATION STEPS:
1.
TURN OFF POWER.
2.
PLUG IN CONNECTORS FROM ARM TO FIXTURE.
3.
PULL LATCH AND LOWER FIXTURE TO ACCESS BALLAST;
ASSEMBLE FIXTURE TO ARM WITH (2) CAPTIVE SCREWS
(AS SHOWN), CLOSE BALLAST COMPARTMENT.
4.
MAKE WIRE CONNECTIONS FROM INCOMING WIRE
LEADS TO ARM LEADS, AS SHOWN. (WHITE TO
COMMON, BLACK TO HOT AND GREEN TO GROUND).
NOTE: ASSEMBLY MUST BE GROUNDED TO THE
INCOMING EQUIPMENT GROUND SUPPLY.
5.
PLACE WIRING IN POLE AND SECURE FIXTURE
TO POLE (HARDWARE AS NOTED).
6.
INSTALLATION COMPLETE.
14249 Artesia Blvd. P.O. Box 1869
(714)994-2700 fax(714)994-0522
CONNECTIONS
(BY OTHERS)
MOUNTING HARDWARE
10.00
FOR POLE BY AAL,
1
HARDWARE INCLUDED.
FOR POLE BY OTHERS,
HARDWARE BY OTHERS.
DOME
3/8-16 X 1" LG
SHCS S/S
(2) P/N A84186
La Mirada, CA 90638-1869
WIRE
INCOMING
WIRE LEADS
ARM
CONNECTORS
CAPTIVE SCREWS
LATCH
LAMP (REFERENCE)
(BY OTHERS)
SAFETY CALBE
FITTER CAP
TABS
BALLAST
1
CLOSED
FITTER CAP DETAIL
LAMP SERVICING:
1.
TURN OFF POWER.
2.
PULL LATCH AND LOWER FIXTURE, AS SHOWN.
3.
INSTALL LAMP (BY OTHERS). AND
CLOSE FIXTURE AND LATCH SECURELY.
4.
LAMP SERVICING COMPLETE.
BALLAST SERVICING:
1.
TURN POWER OFF.
2.
ROTATE FITTER CAP COUNTER CLOCKWISE, UNTIL
FREE FROM FIXTURE. (SEE FITTER CAP DETAIL)
3.
LIFT FITTER CAP WITH BALLAST FROM FITTER AND
UNPLUG ALL CONNECTORS.
4. SERVICE BALLAST.
5.
PLUG IN ALL CONNECTORS AND CAREFULLY PLACE
BALLAST INTO FITTER.
6.
ROTATE FITTER CAP CLOCKWISE, UNTIL TABS SNAP
SECURELY INTO FITTER.
7.
BALLAST SERVICING COMPLETE.
DATE
APPRVD
DATE
REV.
CATALOG NUMBER
PROS DIR
TRA59D
4" O.D. POLE (REF)
OPEN
PART NO.
A96485