Digiflex SMART RF RF121 Manual de referencia del instalador - Página 4

Navegue en línea o descargue pdf Manual de referencia del instalador para Transceptor Digiflex SMART RF RF121. Digiflex SMART RF RF121 8 páginas. Base station with relay outputs

Imprimir página

Receiver Operation

At start up the control panel will configure the receiver

with all the necessary information. The Base Station will

receive information and then send an acknowledge to

the RF device if it supports 2-way communication. For RF

devices that are only one way then no acknowledge is

sent.

Where two or more receivers are required to achieve the

desired coverage area there can be overlapping areas

where multiple receivers detect the same RF device. The

system will determine the receiver with the strongest

signal level and process it accordingly. The seamless op-

eration and wide coverage area using a LAN connection

allows easy deployment of receivers over the full 1km

control panel LAN length.

Receiver LED Indicators

The Base Station includes RED and GREEN LED indicators

which provide visual feedback during system operation.

See Table 3 for information on the indicator colours and

meanings.

Figure 6: Base Station LED Indicators

Position

Colour

Red

Green

Red

Green

Page

P/N: RF120-RF121IRG Rev 1.30



Module Indicator Lights

Meaning

Blinks each time a packet is sent to a device. In most cases this will

RF Transmit

blink as an acknowledge is sent to a 2-Way device.

RF Receive

Blinks each time a valid RF packet is received.

Very Slow Flash = Service Mode

System State

Slow Flash = Learn Mode

On Solid = Tamper or jamming levels exceeded or LAN lost or Error.

Status

Blinks each time the system is polled by the control panel.

Table 3: Receiver LED Indicator Descriptions

Multiple Receiver Wiring Connection

LAN +

LAN -

LAN A

LAN B

LAN +

LAN -

LAN A

LAN B

Figure 7: Base Station LAN Wiring

Meaning

E&OE

Wiring Legend

Control Panel

RED

= LAN +

BLACK

= LAN -

WHITE

= LAN A

BLUE

= LAN B