ARCHITECTURE TECHNOLOGY CORPORATION CRR-1000 Manual de inicio rápido - Página 11

Navegue en línea o descargue pdf Manual de inicio rápido para Router inalámbrico ARCHITECTURE TECHNOLOGY CORPORATION CRR-1000. ARCHITECTURE TECHNOLOGY CORPORATION CRR-1000 18 páginas.

Imprimir página

CRR-1000 Quick Start Guide

Figure 1, below, provides an overview of the JSON schema used by the CRR-1000.

An online, traversable version of the ARES schema can be found at:

https://www.atcorp.com/docs/crr-1000/aresprod.html

The elements in bold, such as RouterId, are required. Objects are enclosed in curly braces, and arrays are

enclosed in square brackets. Commas are required after all elements except the final element in an object

or array. Valid ARES configuration options and syntax can be found at:

https://www.atcorp.com/docs/crr-1000/

A nano-style text editor (https://www.nano-editor.org/) is invoked by the following CLI command:

admin@CRR> configure ares

Note that when exiting the editor, a syntax check is performed. Syntax errors are displayed to the user,

and the configuration file cannot be saved until they have been corrected. The most common types of

errors are missing commas, quotes, or brackets.

Configuration of the CRR-1000 begins with identifying the hardware addresses of the physical interfaces.

To view the hardware addresses of the physical interfaces connected to the router use the "show ip"

command described in Section 3.1.

In the following example, the hardware address returned by "show ip" is indicated by bold type, i.e.,

08:00:27:b2:4a:fe.

admin@CRR> show ip