ARCHITETTURA SONORA CUBE400 Manual de servicio - Página 2
Navegue en línea o descargue pdf Manual de servicio para Altavoces ARCHITETTURA SONORA CUBE400. ARCHITETTURA SONORA CUBE400 6 páginas.
Imprimir página
1.1 > Crossover Board Removal:
x
y
x
1.2 > Crossover Cables Removal:
1 >
Open the box with the Phillips screwdriver (C)
2 >
Desolder the six connections using the welder (F). Remember the phases.
3 >
Unscrew the sealed cable glands (
2.0 > Assembly Procedure:
5 >
Remove the coax. Remove the
silicone holding the cable into its
appropriate groove carved into the
Cube's body. Slip the bipolar cable out
through the groove and the hole on the
inside ange and pull it inside.
7 >
Using the cutter (A) remove the nylon cable ties
closing the "candy", unroll the acoustic dumper to make
possible any intervention in the crossover box.
x
brown
y
x
wrap the sheet of sound insulation around the box so that it looks like a candy
y
) using the two at wrenches #17 (D) and pull the cables out.
1 >
wrap the acoustic dumper sheet
around the crossover box so that it
looks like a "candy".
-
+
1 >
white
brown
2 >
+
+
HF
LF
yellow
3 >
-
-
LF
HF
green
white
6 >
Remove the acoustic dumper disc and
take out the acoustic foam "candy" that
contains the crossover IP65 waterproof box.
Remove the perimeter acoustic dumper from
inside the cube and keep it on a side.
Open the box with the Phillips screwdriver (C)
Desolder the six connections using the welder (F).
Remember the phases.
x
Unscrew the 4 screws (
) securing the board to
the box and remove the board.
2 >
seal the acoustic dumper wrap-
ping by closing it with the two nylon
cable ties.