FHM SG24-PRO Manual de operaciones y piezas - Página 9

Navegue en línea o descargue pdf Manual de operaciones y piezas para Amoladora FHM SG24-PRO. FHM SG24-PRO 18 páginas. Stump grinder

MAINTENANCE

1. Proper and routine maintenance is critical to operator safety, achieving proper stump

grinding results and in prolonging the life of the machine.

2. For cleaning and maintenance of the stump grinder, switch off the tractor PTO shaft and

turn the engine off.

3. Inspect the unit before each use for loose nuts and worn cutting teeth. Also clean any

build up of debris.

4. After 2 hours of operation, check for loose nuts and worn cutting teeth. Tighten and

replace as necessary.

5. Grease the bearings and the pivot pins on the main housing as needed before each use.

Do not over grease the the bearings as this will blow out the seals and cause premature

bearing failure.

6. Inspect the clutch plates on the PTO shaft periodically to ensure that they are not

seized together. Refer to "PTO Shaft Clutch Run In" in the "Stump Grinder Set Up

Procedures" section of the manual.

Farmer-HelperSG24 Stump Grinder

Revision 12-12-2017