Ayra 9000-0031-5974 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Foco Ayra 9000-0031-5974. Ayra 9000-0031-5974 17 páginas. Rgbaw + uv led spotlight

Imprimir página
Ayra 9000-0031-5974 Manual del usuario
To activate the device, plug it into a mains socket. Once it's connected to an active power source, it will turn
on automatically.
During calibration, 'AYRA' will be shown on the display, which means the device is not ready to be operated.
Once the device has fully started up, it will jump to the last-used mode. Operation modes and other settings
shown on the display can now be adjusted or changed by means of the menu buttons.
Should the device detect a DMX signal, it will automatically switch to DMX mode and will display the last-
used address. For new devices, this will normally be DMX address 001. Of course, you can change the DMX
address via the display using the menu buttons.
Using the display and the menu buttons, you can adjust the functions and settings of the device. Press 'enter'
to confirm an adjustment or select a function, use 'up' and 'down' to change amounts and 'menu' to go back
to the menu. By holding the 'menu' button down for 2 seconds after saving a specific setting, the device will
return to operation mode and adopt the setting. This will also be done after any changes in the operation
mode or DMX address. This operation is not always necessary, considering the device automatically does
this after a new setting is confirmed.
The menu contains the following options and functions
display
Mode
ADDR / A001
DMX address configuration
CHND
Channel mode selection
SLND
Slave mode
SHND
Automatic mode
SOUND
Sound-controlled mode
SENS
Sound sensitivity
BALA
Colour balance basic colours
LED
LED Display on/off when not in
use
DISP
Display inversion
TEST
Test mode
TEMP
Temperature in degrees Celsius
HOUR
Time registration
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:24-01-2017 RV
Operation and mounting
Function
Address A001 ... A512
2CH/3CH1/3CH2/4CH/5CH/6CH/9CH
Master
Slave
Fade – FA00 – FA99 speed selection (press
Enter for D000 – D255 dimmer level)
Show – music-activated mode
Colo – COL1 – CO63 colour preset (press Enter
for D000 – D255 dimmer level)
Jump – JU00 – JU99 speed selection
Mode: ON / OFF
0 - 100: sensitivity in %
RED: correction red 50 – 255
GREE: correction green 50 – 255
BLUE: correction blue 50 - 255
ON/OFF
Display inversion, displ - dslp
The test program runs through each LED colour
one by one to check they are all functioning
correctly
0 ~ 9999 temperature indicator
0000 – 9999 usage in hours
Revision date and author's initials: -