Crenova MS8233D Instrucciones de uso - Página 2

Navegue en línea o descargue pdf Instrucciones de uso para Multímetro Crenova MS8233D. Crenova MS8233D 12 páginas.

Introduction

This manual is used to MS8233D Digital Multi Meter.

This Meter is a handheld and battery operated Digital Multi Meter (DMM) with

multi function. This Meter is designed to meet IEC61010-1 & CAT II 600V over

voltage category and double insulation. The meter with holster that is giving the

main body, though downsized, high resistance against the shock of a drop.

The DMM as general measurement tool and widely used in the school, laboratory,

factory and other social field.

This operating instruction covers information on safety and caution.

Please read relevant information carefully and observe all the warnings and

note strictly.

Warning

To avoid possible electric shock or personal injury and to avoid possible damage

to the meter or to the equipment under test, adhere to the following rule:



Do not apply more than the rated voltage, of marked on the

meter, between the input terminal and grounding terminal..



Do not apply voltage between COM and OHM terminal, in the

resistance measuring state.



Do not measure current with test lead inserted into voltage or

OHM terminal.



Do not expose the instrument to the direct sun light, extreme

temperature and humidity or dew full.



Inspect the test lead for damaged insulation or exposed metal.



Before measuring current, check the Meter's fuses and turn off

power to the circuit before connecting the meter to the circuit.



Disconnect circuit power and discharge all high voltage

capacitors before testing continuity, diode, resistance, capacitance

or current.

Note international Electrical Symbol.