Digilent Atlys Manual de referencia - Página 18

Navegue en línea o descargue pdf Manual de referencia para Hardware informático Digilent Atlys. Digilent Atlys 19 páginas. Circuit board

Imprimir página

Atlys Reference Manual

IO1-P: U16

IO2-P: U15

IO3-P: U13

IO4-P: M11

IO5-P: R11

IO6-P: T12

IO7-P: N10

IO8-P: M10

IO9-P: U11

IO10-P: R10

The Pmod connector is a 2x6 right-angle, 100-mil female connector that mates with standard 2x6 pin

headers available from a variety of catalog distributors. The 12-pin Pmod connector provides two VCC

signals (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals. VCC and Ground

pins can deliver up to 1A of current. Jumper JP12 selects the Pmod Vcc voltage (3.3V or 2.5V) in

addition to selecting the VHDC voltage. Pmod data signals are not matched pairs, and they are routed

using best-available tracks without impedance control or delay matching.

On the Atlys board, the eight Pmod signals are shared with eight data signals routed to an HDMI type

D connector. The HDMI connector, located immediately beneath the Pmod connector on the reverse

side of the board, includes an I2C bus and conforms to the HDMI type D pinout specification, so it can

be used as a secondary HDMI output port. A type D to type A HDMI cable may be required, and is

available from Digilent and a variety of suppliers.

Doc: 502-178

VHDC Connector Pinout

IO1-N: V16

IO2-N: V15

IO3-N: V13

IO4-N: N11

IO5-N: T11

IO6-N: V12

IO7-N: P11

IO8-N: N9

IO9-N: V11

IO10-N: T10

Pmod Pinout

JA1:

JA2:

JA3:

JA4:

JA7:

JA8:

JA9:

JA10:

IO11-P: U10

IO12-P: R8

IO13-P: M8

IO14-P: U8

IO15-P: U7

IO16-P: N7

IO17-P: T6

IO18-P: R7

IO19-P: N6

IO20-P: U5

HDMI Type D Pinout

D0+: R3

SCL: C13

D0-: T3

SDA: A13

D1+: T4

CEC: Vcc

D1-: V4

RES: Vcc

D2+: N5

HPD: 5V

D2-: P6

DDC: GND

CLK+: T9

CLK-: V9

IO11-N: V10

IO12-N: T8

IO13-N: N8

IO14-N: V8

IO15-N: V7

IO16-N: P8

IO17-N: V6

IO18-N: T7

IO19-N: P7

IO20-N: V5

page 18 of 19