Digilin SPR Manual de instalación - Página 2
Navegue en línea o descargue pdf Manual de instalación para Luz exterior Digilin SPR. Digilin SPR 3 páginas. Pool, pond & garden fixture
Imprimir páginaSpear - Pool, Pond & Garden Fixture
Installation Guide
Installation
1.
Press stake into ground with light
roughly aligned in desired direction.
4.
Adjust fitting tilt to desired angle.
Note: Drivers should not be covered. Drivers rely on convection air flow for cooling and covering them may cause them to enter thermal regulation.
For any technical information relating to the connection of these luminaires to dimming systems, refer to LED products at
digilin.com.au
+617 3899 1267
2.
Run continuous cable from luminaire back to
dry location to make any joins and connect
to power supply/further fittings.
If insufficient cable has been ordered with
the luminaire, a waterproof cable join, using
an approved waterproof cable joining kit in
accordance with Wiring Regulations must
be undertaken.
3.
Turn on power.
www.digilin.com.au
Page 2 of 3