FIAMA EP25L Manual de usuario y mantenimiento - Página 3
Navegue en línea o descargue pdf Manual de usuario y mantenimiento para Monitor FIAMA EP25L. FIAMA EP25L 6 páginas. Electronic hollow shaft display battery supplied
Imprimir página
Hollow shaft display
Installation
Before installing the instrument, read the following warnings:
a) Connect the instrument strictly following the instructions of the manual.
b) It is the responsibility of the user to check, before using, the correct settings of the parameters of the
instrument to avoid damage to persons or things.
c) The instrument CANNOT function in a dangerous environment (inflammable or explosive).
d) The unit has sensible parts to electrostatic charge, therefore the handling of the inner electronic cards has
to be carried out with appropriate care to avoid permanent damages.
Description
The electronic position indicator EP25L, with inner battery supply, includes in the same case a position
transducer and a display unit setting up a device for measuring linear or angular shifting, compact, easy
assembling, applicable in several type of industry (packaging, woodworking, aluminium, sheet metal, etc.)
The display has 6 digits besides a sign (range from -999999 +999999), with 10 mm-high-digits allow a very
good readability also by distances.
With the 3 frontal keys is possible to programme the value on the display for every turn of the hollow shaft
and start the following functions: reset/preset of quota, absolute/relative quota, conversion mm/inches, and
reading range in degrees.
There are also available 3 distinct origins for the correction of quota by using different tools and the offset
function for balancing of tool wear. On the display all activated functions are showed by a symbol.
The electronic part is seated inside an elegant and strong case made of self-extinguishing and shock-proof
plastic material.
The drive shaft, made in blued steel, turns on precision ball bearings.
The power supply is internal with 2 batteries type AA of 1,5V, one-year-life. The run-down of battery is
indicated with occasional blinking, 1 month before the complete flat the indication remains on; the battery has
to be changed, in very easy way and without loosing quota, while the shaft is standing.
Programming
To step into the parameter programming press key
times key
and appear 4 zeroes, the first on the right is blinking, with keys
RESET
(digit selection), set out password 0273 and confirm with
out of the programming. The parameters that have to be set can be run with key
appearance they are:
value to be displayed for every turn of the shaft,
number of decimal digits,
count direction,
keys opening mode
displacement of origin,
not used.
To enter into the modification of the selected parameter press two times
value) and with keys
To go out of the programming press
Value to be displayed for every turn of the hollow shaft
This parameter together with the following one allows to programme the value which has to be displayed for
every turn of the hollow shaft. The range allowed is from 0,00001 to 999999 with setting of decimal point
position that is, after programming of the last digit on the left, pressing key
and with key
it can be moved to the wanted position. Confirm with
Number of decimal digits
It is the number of decimal digits to visualize on the display, range allowed from 0 to 5.
Example 1: each turn of the hollow shaft will have a displacement on the machine of 50, set
=
50 and
Example 2: each turn of the hollow shaft will have a displacement of 12,345 and on display has to appear
12,3. The constant has to be set at 12,3450 and constant at 1.
Date: 13/01/16
and
set the wanted value to be confirmed with
.
=
0.
and on the display appears
. In case of wrong set-out of password it goes
RESET
RESET
file: EP25L_ing.doc
EP25L
, now press 2
(digit increase) and
and in order of
(one time displays only the
RESET
.
RESET
will blink the decimal pinpoint
.
pag 3/6