Digilock numeris aspire Manual del producto - Página 3

Navegue en línea o descargue pdf Manual del producto para Teclado Digilock numeris aspire. Digilock numeris aspire 11 páginas. Touch rfid latch mechanism
También para Digilock numeris aspire: Manual de instalación (16 páginas), Manual del producto (6 páginas)

Digilock numeris aspire Manual del producto
Programming Instructions
Add Manager Keys
Manager Keys can be programmed to the locks at any time.
1
Go to a lock requiring additional
Manager Keys.
Press
= ` 5 5 `
The LED will turn on.
Replace Keys
The locks must be reprogrammed to prevent the lost/stolen keys from operating a lock.
1
To replace the Programming Key:
Note the order or serial number (found on the lock's rear unit).
1a
To replace the Manager Keys:
Collect all remaining and replacement Manager Keys.
Go to any lock operated by the lost/stolen Manager Keys.
Press
= ` 5 5 `
The LED will turn on.
3
2
Insert the Programming Key.
A two-tone beep will be heard.
.
1b
.
Product Guide
Standard Keypad
Bolt Mechanism
3
Insert each additional Manager
Key one at a time.
A beep will be heard for each
Manager Key programmed.
2
Contact Digilock Support to purchase a replacement Programming
Key.
2a
Insert the Programming Key.
A two-tone beep will be heard.
Insert the Programming Key again.
Three sets of two-tone beeps will be heard and the LED will turn
off. All previously programmed Manager Keys will be erased.
Follow instructions to Add Manager Keys to program the remaining
and replacement Manager Keys to the locks.
Shared & Assigned Use Functionality
4
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Repeat above steps for each
lock or follow instructions to
Express Register Manager Keys
to quickly program multiple
locks to operate with the same
Manager Keys.