FIAMA P1XT Series Manual - Página 9

Navegue en línea o descargue pdf Manual para Posicionadores de válvulas FIAMA P1XT Series. FIAMA P1XT Series 11 páginas.

INPUTS/OUTPUTS TEST (TEST)

In order to have access to the test function it is necessary to enter the password 273.

In the inputs test function display3 will display the

hyphens. Every hyphen indicates one input: the input in the low position (high) indicates that the input is open

(closed).

The inputs test consists in closing the input switches and check that the display corresponds to the figure

below:

Then go to the outputs test by pressing the E key; the display3 will display

In order to enable/disable the outputs press the numerical keys indicated in the following figure: the position of

the hyphen indicates the output status; to the hyphen in the high position (low) corresponds an enabled output

(not enabled).

By pressing the E key it is possible to go back to the inputs test; in order to leave the test function, press P.

SETTING OF THE NUMBER OF CYCLES TO BE CARRIED OUT (CYCL)

By number of cycles we mean the number of repetitions of the positioning programme. The automatic

functioning mode involves the possibility to repeat the selected programme. By setting a number of cycles

greater than 1, once the last dimension of the positioning programme has been carried out, at the next

command by the work counter input the positioner restarts from the first dimension of the selected programme.

data: 13/01/16

DISPLAY2

file: P1X_T_ing.doc

(Test Input) message and display2 will display 4

INPUT CLOSED

NONE

START

PRESET

PIECESCOUNTER

EMERGENCY

(Test Output).

START OUTPUT

NONE

START

FORWARD/BACKWARD

SLOW/FAST

END POSITIONING

AUX OUTPUT

KEY TO BE PUSHED

NONE

pag 9 di 11