Fiamm Premium HF flex Manual técnico - Página 6

Navegue en línea o descargue pdf Manual técnico para Cargador de batería Fiamm Premium HF flex. Fiamm Premium HF flex 10 páginas. 3-phase battery charger

Imprimir página
The information on these screens can be reset to zero via
the Reset line on the Configuration Menu.
Symbol
Condition when charging complete
Normal.
Abnormal (voluntary interruption or
interruption following a fault).
Table B: Symbols for condition when charging complete.

Status

This menu displays the status of the charger's internal
counters (number of normal and equalisation charges, faults
by type, etc.).
Access
On the Main Menu, select STATUS and then press OK.
Call-up screen
An example is presented below.
The information displayed
The information on the screen can be reset to zero via the
Reset line on the Configuration Menu.
Message Information
Charge
No. of charging operations performed.
This corresponds to the sum of lines 2 and 3.
No. of charging operations terminated
abnormally.
No. of charging operations terminated
normally.
Equal
No. of automatic equalisation operations
performed by the charger.
TH
No. of thermal faults*.
DF1, etc. No. of fault of types 1, 2, 3, 4, 5 or 7*.
(*) : See 'Fault Messages'.

Configuration

This menus provides access to the charger's 12
configuration menus.
Access
On the Main Menu, select Configuration and then press OK.
Profile
This defines the type of battery connected to the charger
from among different types (for example Ionic, Gel or PNEU).
To change the profile, press OK, select a profile from the list
▼/▲
using the
buttons and confirm by pressing OK.
Temperature
This value is adjustable according to the battery technology.
•
Without Fiamm Motive Power
battery's average operating temperature before charging.
•
With Fiamm Motive Power energycom: the battery's
operating temperature is defined automatically. It is
advisable to enter the average temperature recorded,
particularly in cold areas.
energycom: it defines the
®
Equal time
Only valid for unsealed lead/acid batteries. This defines the
length of the equalisation operation (1 to 8 hours).
Delayed equal
Only valid for unsealed lead/acid batteries. This defines the
delay before equalisation (1 to 8 hours).
Auto equal
Only valid for unsealed lead/acid batteries. This defines the
initiation method: manual or automatic. Select:
•
ON for equalisation to start automatically on completion
of charging.
•
OFF to prevent automatic equalisation on completion of
charging.
Delayed charge
This defines the delay (1 to 8 hours) between the time
charging is initiated and the time that charging effectively
starts. This time delay enables you to take advantage of '
Off-Peak' tariff times.
Battery rest
This defines the waiting time (1 to 8 hours) after charging
has finished to allow the battery to stabilise.
Electrovalve
This defines the opening time (15 to 120 seconds – Ionic and
Pneumatic profiles only) of the electro-valve for filling the
batteries automatically. When the OK button is pressed, a
function test is immediately initiated for ten seconds. The
operator can therefore check that the electro-valve is
opening correctly.
Range
Only accessible for chargers of the Premium HF flex
48-72-80V type. This defines the battery charging voltage
(48/72V or 48/80V).
Cable length
This defines the length of the cable battery-charger
(1.0 to 10.0m).
Cable section
This defines the cross-section of the cable (battery-charger).
Select a cross-section from the values offered (10, 16, 25, 35,
50 or 70mm
2
).
Reset
This reinitialises the Status and Memory counters after entry
of the password.
Config version
This shows the charger's configuration version.

Contrast

This modifies the display's contrast. A zero value shows a
white screen; a value of 100 shows a black screen. The
optimum value depends on the ambient lighting conditions.
If the messages on the display are unreadable (black or
white screen):
1. Hold down
and
2. When the LEDs flash (Fig. 2), adjust the contrast via the
▼/▲
buttons.
3. Confirm by pressing OK.

Backlight

This activates (ON) or deactivates (OFF) the display's
backlighting.

Language

This selects the language displayed in the menus.
7
▲
simultaneously.